INSTALLATION INSTRUCTIONS FOR BASIC and PREMIUM VERSIONS of KWIKPOP for NINJATRADER
Make sure that NinjaTrader is closed before you begin the download

Please print this document out. Follow these instructions for installation.
Introduction ..Read this First 
Kwik*POP Basic contains  components that are installed on your computer when you run the INSTALLER. It places two folders onto your C\drive.
1)	KwikPOP
Go to COMPUTER .. Local Drive C:\ and you will see the folder. Open the kwikPOP folder.
SERVICE/SUPPORT CALLS
 Inside that folder you will see an icon called KP HELPER. In the event that you ever have a technical glitch, when you call us you can activate that program and allow us to access your computer and see if we can correct the issue from our location. You must give us the one time entry Key and that allows us to work on your computer remotely. Once our session is finished and you close the TeamViewer your computer is secured again.
2)	Quantkey
Quantkey is our program that monitors and distributes KwikPOP and Sonar. Whenever you start your computer QuantKey is activated and you’ll see  the icon appear on your screen.	

Download KwikPOP
Once you have initiated your KwikPOP Subscription you are ready to download and install the KwikPOP package.
Go to our web site http://www.kwikpop.com and scroll down on the Home Page until you see "Installer"

This will take you to the download page

At this point in the process, you will be prompted for your KwikPOP User Name and Password

Enter your information and select "Verify Credentials". You will automatically directed to the correct download link.
You will be prompted to save the download

As soon as the download is completed click on the KPSetup.exe

The KwikPOP installer will open and continue the installation by clicking next. Just follow the default options and click Finish. This will complete the download of the KwikPOP program.

When the Installer is finished, you have the options of
Launch QuantKey Connector
Launch KwikPOP SONAR
View KwikPOP Readme File --this is the same document that you are currently viewing. Uncheck this entry. You can locate this file in the KwikPOP folder on your C: Drive if you need it in the future.
Click Finish

Importing KwikPOP into NinjaTrader

Open NinjaTrader from your Desktop icon.

Click on File—Utilities—Import NinjaScript—Locate your C: Drive in the left column and left click on it.

Left Click once on KPNT30 and then left click once on Open
Click Yes to replace KPNT30.cs if a previous KwikPOP file is installed in NinjaTrader. You will be prompted to shut down and restart NinjaTrader. Click OK.
Working with Templates
Click on File--Workspaces--New Workspace
Then click on File--New--Chart. The data series window opens and select the symbol you want for the new chart. In this case we will create a new CL Tone chart.

Click on CL 06-14 (or current front month) to highlight it.
Click on New on the bottom. 
You can edit the Parameters on the right side of the Data box to set up your chart.
For this example we will be setting up the CL Tone Trade Chart.
For type--left click  in the box to the right of Type and use the Scroll arrow to select Range. Inthe box directly below the Range entry type in 4 if not already entered.
In the Data section--
Set Days to Load to (7)
Left click in the box to the right of Session Template (usually shows <Use Instrument Settings>
Left click on the down scroll arrow and select Default 24/7
Go to the bottom of the data window--Load the following Chart Template (Normally shows <None>)
Left click on the down scroll arrow and select CL Tone
Click on OK and your chart will open.

Repeat the above process for any other charts you want to add to this Workspace. When done--Click on File--Workspaces--Save Workspace as--give this Workspace a name you will recognize in the Save as window and click OK.

Working with Workspaces

Click on File—Workspaces—Open Workspace
At this point select the type of trade you want to follow—we have (3)
KPPivot Trade—very conservative—only trades with the trend
KPMWAP Trade—aggressive—based on Range Bar charts—trades with and counter trend
KPTone Trade—aggressive—now available for the ES and CL markets—uses KPWayne3DBox
You will find workspaces for the (3) types of trades—select one and the chart will open up. We have selected the KPTone Trade ES to start with. This will open a 7500 volume chart of the ES.

The other (2) trade type charts will plot the same way.
The KPWayne3DBox is an important piece of the KPTone Trade. The 3DBox is a powerful tool that monitors (3) different time frames/markets using (12) KwikPOP indicators.
List of KwikPOP indicators in each section of the 3D Box
Row	Indicator
1	Pivot2Color
2	ScoreCardColor
3	Triggerline/Autostop
4	MWAP
5	Eband Center
6	Eband Outer
7	A900
8	Snapback1-Red or Blue
9	Snapback2 –if 8 is Blue and above smoothed 
	       line by more than.2=Blue, opposite if 8 is red
10	Trend2
11	Fast2
12	MRange

SONAR

Sonar should also be on your Desktop. You will see 3D Boxes for individual markets-- 
Look  on your desktop for the KwikPOP icon

Double click on the icon and the KP Sonar Control Center will appear.

Now click on File in the KP Sonar Control Center and a pop-up window will appear with (8) 3D Box market options. Just click on the ones that you are interested in.

Other Options

KwikPOP PREMIUM

Now open NinjaTrader and go to File > Workspace > New Workspace

Click on File one more time and select New then Chart. The Data Series window will pop up. For our example, we are going to set up the 7500 vol chart for the ES. 
Select the proper contract for the ES and click on new. This will place the ES current contract in the lower left window and the parameters on the right side. In the Period section, the type should be Volume and the Value should be 7500. Move down to Days to load and enter 7. Toggle Session template to read Default 24/7. Go to Load the Following Chart Template and select kppremium. Click OK. 
Your chart should look like this.
You are now ready to use KwikPOP Premium
NOTE: KwikPOP Premium includes ALL of the markets and indicators provided in the (4) Basic packages. Follow the Basic instructions to use these features.
KWIK*POP Basic1	ES & NQ
KWIK*POP Basic2	6E & FDAX
KWIK*POP Basic3	YM & TF
KWIK*POP Basic4	CL & 6J

You are now ready to set up your charts. Following are the different time frames for the (8) markets that make up the Basic packages.
ES	7500 volume
NQ	610 tick
YM	444 volume
TF	600 volume
6E	1000 volume
FDAX	695 volume
6J	555 volume
CL	2 minute

Now go to File > Workspace > New Workspace 

Click on File one more time and select New then Chart. The Data Series window will pop up. For our example, we are going to set up the Basic 1 workspace consisting of a 7500 volume chart of the ES and a 610 tick of the NQ. For Basic 2, 3 and 4, just substitute the proper symbols and time frames.
Select the proper contract for the ES and click on new. This will place the ES current contract in the lower left window and the parameters on the right side. In the Period section, the type should be Volume and the Value should be 7500. Move down to Days to load and enter 7. Toggle Session template to read Default 24/7. Click OK.

You now will have a simple 7500 volume chart of the ES without any indicators.
Right click on the chart and select Indicators. Looking at the upper left corner of the Indicator window, scroll down to KPTemplateBasic and left click once to highlight it and select New. 
The first time you apply Kwik*POP to a chart you will be prompted for your UserName and PassWord. Enter this information that you received in the email after you started your subscription.
Repeat the above steps for the NQ 610 tick chart. Type should be Tick and the Value 610.
You should now have 2 charts on your screen. A 7500 volume chart of the ES and a 610 tick chart of the NQ. It should look like this.

Now, once again click on File > Workspace > save workspace as --Enter a name that you prefer and click OK.

KNOWN ISSUES
QuantKey.exe is an internet application. Obviously, it is a new application and as such, some Anti-Virus programs will classify it as a threat as there are no known files on the application. As more users activate QuantKey the search engine/anti-virus data base will expand and the threat level will drop and eventually go away. If your antivirus program triggers an alert allow your ant-virus program to accept QuantKey.exe. Most programs have a simple process for accepting files, but Norton is a little more difficult. 
If you use Norton 360, follow these steps.
1. From the Norton 360 main screen, click on Settings, then AntiVirus. On the index tab Scans and Risks, scroll down, and under Exclusions / Low Risks, click Configure to the right of Items to Exclude from Scans. Click Add, then type "C:\KwikPOP" (without the quotes), then Add again, and "C:\QuantKey". Click OK.
2. On the next item down, which is Items to Exclude from Auto-Protect and SONAR Detection, click Configure at the right, and Add, then "C:\KwikPOP" and Add, and "C:\QuantKey", then OK. 
These two steps tell Norton 360 not to continuously rescan these directories, which contain files required by Kwik*POP.
3. Then, to install Kwik*POP, right click on the Norton 360 icon in your system try, and select Disable Antivirus Auto-Protect, and accept the default of 15 minutes. This tells Norton 360 not to block the installer we are about to download.
4. Download and run the file http://www.traders-syndicate.com/kpsetup.exe from your browser such as Internet Explorer. If you are prompted for actions, click Actions, then Run anyway, or More options then Run Anyway if you see More options instead.
At this time the programs are installed and you can right click on Norton 360 in your system tray and Enable Antivirus Auto-Protect (or reboot, if you prefer) which puts everything back the way it was and the programs should be good to go.